NINGBO ZIMON ELECTRICS CO., LIMITED
Main products:Underwater Light,Bulb Lamp,Flood Light,Ceiling Light,Street Light
Products
Contact Us
  • Contact Person : Mr. Mei Joe
  • Company Name : NINGBO ZIMON ELECTRICS CO., LIMITED
  • Tel : 86-574-83008838
  • Address : Zhejiang,Ningbo,Room 502, No. 221, Tiangao Xiang, Yinzhou Dist.
  • Country/Region : China
  • Zip : 315000

PIR night lamps

PIR night lamps
Product Detailed
PIR night lamps

ZM-173 motion sensor lamp

The ZM-173 is a new type of energy saving motion sensor lamp; it adopts PIR technology to sense motion and turn on the light automatically; it is an automatic lamp which will be on when one comes and automatically off after leaves. If you want the light to remain on for an extended period of time, just slide the switch to the “ON” setting to turn the light on and keep it on, until you turn the switch off.

Specification

     Power supply: 4XAA batteries      Time delay: 20sec±5 sec     Rated load: 1W      Sense distance:7m(22°C)     Sense angle: 120°     Operating temperature: -10~40°C     Relative humidity:<93%RH

Problems and solutions

the sensor sensitivity is low please check if in front of the detection window there is obstruction effecting the sensor to receive signal; please check if the temperature is too high; please check if the sense signal is in the detection range;
the sensor can not shut off the lamp automatically checkif in the detection range there is continual sense signal; if the battery accords with instruction required; if the air temperature near the sensor lamp change obviously, for example air conditioning or air heating, etc.

Operation

Insert 4 AA batteries into the battery box; Slide the switch to “ON” , the lamp is always on, here no sense function; Slide the switch to “OFF” ,the lamp is powered off; Slide the switch to “AUTO” ,the sensor is activated. The lamp will turn on when motion is detected. The lamp will automatically turn off 15s~25s later after the last motion is detected.

Note: the sense time interval is 5sec, that mean: after the lamp turn off, you should sense it again after at least 5sec and the lamp will turn on again.

Attentions

The product shouldn’t be used in the zones the air temperature changes obviously: for example air conditioning and air heating; In front of the detection window there should be no obstruction or moving object to effect its detecting.

 

PIR night lamps



Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.